Canon MG3520 Wireless Setup Call +1-833-284-2444 Canon Printer technical service number

Canon MG3520 Wireless is an inkjet printer through which you will get the exceptional printing experience for your office and home. Through this printer, you even scan from anywhere because of its built-in Wifi facility. There are some more additional features like Automatic Duplex Printing and Mobile Device Printer. To use these facilities you need to purchase it and will have to set up.

If you have just recently bought a new one it's very easy to set up,
but if you are not able to set up then you can directly call on Canon Printer Technical Service Number +1-833-284-2444.

You can read this article will help or tell you the steps that need to follow

There are simple 2 methods to set up Canon MG3520 Wireless Printer

These two simple methods will help you to set up and establish a connection with your Windows device with just following these simple steps given below-

STEP 1:- WPS Connection Method ( WIFI Protected Setup)

You should know how to connect Canon MG3520. Check the WPS connection through a simple step as:

·        You first need to check if the WPS Push button has a proper access point. You can check the guidelines from the device’s user manual. The network must have the WPA security protocol in it.

·        You have to first check if the printer is turned On. Now, you have to tap on the WiFi button from the top of the printer until the alarm lamp flashes.

·        You need to go to the access point and hold the WPS button for about 2 minutes. When you notice that the blue lamp is continuously flashing, then it is an indication that you have successfully connected to the access point.

When wifi lamp sign stops blinking that means Wifi has successfully connected with printer.

How to check if the network is successfully connected?

To check if the printer is successfully connected to the wireless network, you need to print a page. And for that, you have to do the following steps:

·        First, you have to check if the printer is turned on.

·        Now, in the main tray of the printer, you have to put A4 sized paper.

·        Next, you have to press and hold the Resume/Cancel button until the alarm time flashes 15 times.

·        Then, release the button and you will see the network information page is completely printed.

·        At the time of printing, you have to check if the connection is showing “Active” and the SSID showing up the correct name of the Wireless network.

This helps you to check whether you have connected the printer appropriately. Now, let’s move to the installation process of the software to get the best experience from the printer.

Method 2: Standard Connection method

To connect the Canon MG3520 printer with the WiFi network, you can also implement the standard connection method. And for that, you have to perform the steps that are mentioned below.

·        You have to insert the CD that came along with this wireless printer and run the setup on the device.

·        If you don’t have a CD, you can download the manuals and software to continue the process.

·        When the initial screen will appear on the screen, you have to tap on the “next” option.

Note: If you are given two choices between the wireless connection and the USB, you have to choose the Wireless connection. Now, check if the printer is turned On and also look out for the Power button.

·        You need to click on the Connect Network option tHat will be shown.

·        Then you need to click on the Cableless Setup option.

·        When the Connection via cableless setup screen will appear, you have to tap on the WiFi button until the orange alarm lamp starts to flash. (It will flash twice.)

·        After that, you have to release the button. You will see the wifi light flashing. Right after that, the green flashlight will flash and you have to click on “Next.”

Note: The network connection that you use will be disabled. Wait for a while and the connection will come back, as soon as you click on “Next” to complete the process.

·        Now, you have to choose the region next and click on “Next”. You have to choose the software that you want to install.

·        Hit the “Next” button next. You have to hit the “Yes” button to agree on the license agreement Canon products.

How to end with license agreement??

You have to go through the following steps to finish the license agreement:

·        On the next screen of the license agreement, click on the “Next” option.

·        You just have to put the model number of the printer (e.g Canon MG3520) and the name of the wireless network.

·        Now, tap on “Complete” and the process ends there.

These simple methods help how to set up the Canon MG3520 wireless printer. If you face any issue at the time of setting up the printer, you can call on Canon Printer Support Service Number +1-833-284-2444 or you can share it on www.printersupportnumber.co .